Forks

More than 20 years ago, BoXXer changed the DH world when it hit the scene. Featuring Charger 2.1 damper for unrivaled control between the tape. Ultra-low friction SKF wiper seals and race-proven Maxima Plush damping fluid all work overtime to reduce friction, noise, and provide lasting fork performance all the way to the finish corral. - Completely re-designed to reduce hand fatigue and fight unwanted friction, the Charger 2.1 damper increases confidence and control over every trail - Charger 2.1 RC2 damper featuring independent high- and low-speed compression adjust - Highly tunable DH-specific DebonAir spring offers a coil-like consistent feel throughout the travel - Ultra-low friction SKF wiper seals provide long-lasting fork performance and improve overall suspension feel - Maxima Plush damping fluid reduces friction and silences damper noise - Ultimate foil graphics package

Get Inverted Back and better than ever the new Dorado Expert is ready to take on the gnarliest conditions mountain biking can provide. Whether you’re looking to cut seconds off the splits, lap the local park, or get sendy in the back hills of Utah the Dorado Expert has you covered. Featuring an all-new 37mm chassis, completely redesigned internals, and on-trail precision that only inverted forks can provide the new Dorado is your ticket to the best ride you’ve ever had. Key Features: - New 37mm chassis results in a massive increase in stiffness and ride quality. The new chassis is 20% stiffer compared to our former 36mm version - Inverted Design provides an incredibly smooth and consistent feel due to constant lubrication of the bushings and seals. The inverted design also provides a major increase in fore-aft stiffness compared to traditional forks while maintaining torsional compliance which provides more control to the rider over rough terrain. - Dorado Air Spring system contains a unique balancing valve that equalizes the positive and negative air chambers during the air-fill process resulting in a consistent feel without any flat or dead spots. It also allows easy Travel Adjustability from 180 to 190 and 203mm without the need for any spare parts. - IVA (Incremental Volume Adjust) modifies the volume in the positive air chamber with self-contained spacers dictating the position of the IVA piston and your volume amount. - New TPC+ Damper has increased oil volume and improved flow paths for improved bump compliance and increased consistency. TPC+ features two compression pistons, a hydraulic bottom out, and a spring-backed IFP for a smooth and predictable feel for every impact. Adjustments include; High-speed compression, Low-speed compression, and Low-speed rebound. - Fits both 29" and 27.5" wheels. Markings on the outer legs indicate the proper clamping point for the ideal axle-to-crown measurements depending on wheel size. The fork legs can be used with both wheel sizes. - Two Crown Options are available with this fork. The 47 offset is designed to work with 27.5" wheels and intended axle to crown. The 57 offset crown is designed for 29" wheels and axle to crown. For those looking to run the lower offset crown with 29" wheels please reference our fit document to see if your headtube length is compatible. - TSR Bleed Screws allow you to release excess pressures built up in the outer legs of your fork while riding keeping your fork smooth and supple all day long. Product Details: - 37mm 6000 Series Aluminum stanchions with aluminum legs - Externally adjustable high-speed compression, low-speed compression, and rebound - TPC+ Damper with HBO (Hydraulic Bottom Out) - TSR bleed buttons - Includes removable bolt-on fender - 2.6" max tire width - 223mm max rotor diameter - Wheel: 27.5" - Steerer (Stem/Race): straight (28.6/30) - Offset: 47mm - Travel: 203mm - Spring Type: Dorado Air w/ IVA - Damping: adjustable TPC - Adjustability: air volume, rebound, HS and LS compression - Brake Mount: disc only (PM-203) - Dropout: 20x110mm (Boost) - Axle-Crown: 582mm - Weight: 6.87lb (3120g)

The 34 Step-Cast Performance is the choice for riders who want an all-round fork that performs in a vast range of applications: lightweight for climbs and highly capable for demanding terrain with enough travel to instill confidence when the trail gets rough. Weight savings are attributed to external lower casting steps, hollow lower section, and shortened shaft lengths. - Step-Cast chassis - Black anodized upper tubes - FIT GRIP damper and FLOAT EVOL air spring - Dedicated air spring and damper tune are specific for this travel range, with a lighter tune at mid and higher velocities - Performance Series black-on-black graphics package

The 34 Step-Cast Factory is the choice for riders who want an all-round fork that performs in a vast range of applications: lightweight for climbs and highly capable for demanding terrain with enough travel to instill confidence when the trail gets rough. Weight savings are attributed to external lower casting steps, hollow lower section, and shortened shaft lengths. - Step-Cast chassis - Genuine Kashima Coating on upper tubes - FIT4 damper and FLOAT EVOL air spring - Dedicated air spring and damper tune are specific for this travel range, with a lighter tune at mid and higher velocities

When a fork isn’t designed well, you feel it from the minute you start your ride. That is why Whisky poured over every detail, pushed the limits and broke new ground during the creation of the No.7 Carbon Cantilever Cyclocross Fork. It makes sure you don't have to worry about uncomfortable chatter or vibration while experiencing an astoundingly plush ride. They've accomplished this by using the proven technology of a delightfully stiff and compliant UD carbon fiber construction. It all results in an enhanced riding experience and adds up to performance that you can count on. - Cantilever brakes with 22mm posts - 51mm clearance between fork blades - Includes compression plug - Axle to Crown Length: 392.2 mm - Brake Mount (Fork): Canti Studs - Crown Race: 30 - Front Axle: 10mm x 100mm - Material: Carbon - Maximum Tire Clearance (Fork): 48mm - Offset: 45 mm - S.H.I.S. Stem Clamp Diameter: 28.6 - Steerer Tube Length (mm): 300 mm - Steerer Type: Straight - Wheel Size: 700c

34 Factory is the ultimate trail companion. Featuring an EVOL air spring, choice of dampers, and a lightweight yet robust chassis, you can count on 34 to get up and down the mountain, every time. - Genuine Kashima Coating on upper tubes - FLOAT EVOL air spring

The ultimate aftermarket disc brake specific road cycling fork featuring 32mm of tire clearance and solid 12mm thru-axle for secure and confident handling. Building upon nearly a decade of experience making the world's best forks, ENVE's latest road disc fork features a modern 32mm of tire clearance, a low axle-to-crown height of 370mm, internal hose routing, and a lightweight one-piece form construction developed specifically to handle the demands of disc brakes, rough roads, and large volume tires. - Material: Carbon Fiber - Steerer Tube Length: 350mm - Rake: 43, 50mm - Axle to Crown: 370mm - Brake: Disc - Axle Compatibility: 12mm - Max Rotor Size: 160mm - Max Tire Clearance: 32mm - Crown Race Diameter: 1.25 - Torque Spec: Steer Tube: 5Nm - Torque Spec: Axle: 8Nm - Weight: 425g

- 35mm chassis at home on the trail - stiff, playful, and light, really light - Charger RC damper featuring Low Speed Compression adjust - DebonAir+ is built to strike the perfect balance of what riders really want: butter-like small bump feel, increased air volume to add support throughout the travel and higher overall ride height for more confidence when things get steep. - RockShox premium short fender included - Maxima Plush damping fluid reduces friction and silences damper noise

With optimized material concentrated at the brace and seal area, outstanding stiffness and steering precision, and new E-MTB configured fork options with fender mounting points, Recon Silver is an all-around performer suited for any MTB or E-MTB bike. Features - New E-MTB endorsement options with fender mounts are appropriate for all E-bikes (15x110mm version) - New graphics are easy to read and make a fresh impact - Motion Control damping featuring low-speed compression adjustment to lockout - Fit Tires up to 2.8" (15x110mm version without fenders; the use of a full fender will reduce tire clearance) - Fast Black finished 32mm steel upper tubes couple stiffness with a premium look

The Circus project started as a way to get our slopestyle riders into competition, but it wound up becoming an industry-leading dirt jump fork for riders all over the world. Circus has set the benchmark for everyday riders' jump session requirements and delivered podium results at pro-level competitions for almost a decade. - Coil Spring - ABS+ Compression Damping w/ Jump Stack - Adjustable TPC Rebound Damping - Absolute+ cartridge platform oil damping system: specifically tuned for Dirt Jumping - 20mm hex axle provides superior torsional stiffness - Forged I-beam style crown: bigger, stronger and more durable - 1-1/8" threadless steel steerer and 32mm steel stanchions - Can be reduced to 80mm travel with included spacers

The Machete is purpose-built for slicing trails, with Kwik Toggle compression damping inspired by our renowned Absolute+ technology. Kwik Toggle achieves on/off lockout simplicity in a lightweight, practical package. - TS air spring with in-leg adjustable TPC rebound damping - Kwik-Toggle damper with lockout, adjustable rebound, and high-speed compression - 32mm black anodized stanchions with hollow bore forged aluminum crown - Easily upgradeable to remote using MILO upgrade kit part #314934 - Travel is internally adjustable from 80 to 120mm in 10mm increments - Disc brake only (74mm/6" post-mount) - 27.5x3.0"/29x2.5" maximum tire width

Featuring 37mm stanchions and our Reverse Arch design the Mezzer Pro is the stiffest Enduro fork on the market… it’s also the lightest. How did we manage to accomplish this you ask? Well, it’s not hollow if that’s what you're wondering. In fact, this fork is loaded with technologies such as a fully sealed MC² damper, our proven Dorado air spring, and the life-changing IRT volume adjuster. What does all this mean? It means you no longer need to pick two, you can have the lightest, stiffest, and incredibly adjustable fork all at once. Key Features: - 37mm stanchions, Reverse Arch design, and Hexlock SL2 axle combined together result in ultimate stiffness - Originally developed for the Dorado down-hill fork, the Dorado Air Spring offers ultimate sensitivity featuring a self-equalizing negative air spring. When inflating the fork both the positive and negative air chambers are filled simultaneously equalizing the pressures to create an incredibly supple feel - IRT (Infinite Rate Tune) volume adjuster allows control over the mid-stroke support and bottom-out progressivity independent from the initial spring rate to independently tune small bump sensitivity and big-hit performance - Sealed MC² damper provides a range of blow-off thresholds to satisfy any requirement with separate high-speed and low-speed adjustments. Utilizing a bladder, our new sealed cartridge maintains damping consistency in the most severe riding conditions. - 140mm to 180mm internally adjustable travel in 10mm increments (travel spacers included) - 27.5” and 29” wheels - Integrated flexible fender can be installed/removed by three small screws threaded into the arch of the fork Product Details: - MC² bladder cartridge damper offers adjustable high-speed compression damping, low-speed compression damping - Expansion bladder with patent-pending blow-off valve compensates for oil displacement, with lower friction than a traditional internal floating piston - 37mm chassis with torsional stiffness up to 30% higher than similar forks from competitors - Dorado Air spring features an enlarged negative air chamber for linear initial stroke and reduced IRT volume for progressive end stroke - Internally adjustable travel from 180mm to 140mm

The 40's GRIP2 damper delivers ultimate performance and control when the going gets rough. Equipped with the Variable Valve Control (VVC) high- and low-speed rebound adjuster, improved compression damping and less friction overall, the 40 is just as comfortable in the bike park as it is racing the World Cup circuit. - Genuine Kashima Coating on upper tubes - Variable Valve Control (VVC) - Low friction seals for improved performance - FIT GRIP2 damper and FLOAT EVOL air spring - 29": 755mm peak tire diameter

The Firestarter carbon fork is made from high-modulus carbon fiber, built for all-terrain riding. Three-Pack mounts on each leg give you room for water or Anything Cages, and mid-blade mounts accommodate racks for panniers. This fork is light, tough, and ultra-versatile with the capacity to fit a wide range of tire sizes. - High modulus carbon fiber construction - Tapered 1-1/8" to 1-1/2" steerer tube - 160mm minimum rotor size; 180mm maximum rotor size - Mid-blade mounts for low rider racks - Compatible with wheel sizes: 27.5+, 29", 29+, 700c - Dual sets of Three-Pack mounts on each fork leg for Anything Cages or water bottles - BOOST 110 x 15mm thru axle included - Front Axle Size: 15 x 135L, TP=1.5, TL=10 - Internal routing for 110 BOOST dynamo hubs

Ritchey's history with cyclocross runs long and deep, sort of like the mud sections of your favorite 'cross course. The WCS Carbon Cross Disc Fork is designed from the ground up to manage the unique stresses a disc brake demands – including a carbon layup that resists twisting under hard braking. Decades of experience between the course tape, and building the bikes and components designed to win, inform the performance and design details of this fork. It employs a monocoque construction, it's compatible with standard and integrated headsets, and features carbon dropouts and disc mount. - Blade: Carbon - Crown: Carbon - Steerer: Carbon - Steerer Length: 300mm - Steerer Diameter: Tapered 1-1/8 – 1.5-inch - Rake: 45mm - Blade Shape: Curved - Drop out: Carbon - Rotor size: 140mm (160 w/ adapter) - Crown Diameter: 45mm - Integrated 45-degree crown race - Axle-to-Crown: 395mm - Finish: Matte UD carbon - Weight: 440g (w/ uncut steerer) - Compression plug included

This is the Pike DJ. It's a cousin to the award-winning Pike, which makes it look a lot like a trail fork — until you ride it. Pike DJ is built on a stout 35mm chassis and includes a custom-tuned Charger damper and specific Solo Air system designed for more bottom-out progression than you'll ever need because your trails eventually require some landings. - New graphics package for a fresh, premium look - Proven Charger damper with specific Dirt Jumping/Slopestyle tune - Specific Solo Air top cap for extra bottom-out progression - Accepts Bottomless Tokens to easily custom-tune the air spring performance to best match your own riding style and suspension preference

With more than 40 years of designing and building bicycles and components dedicated to adventures that go beyond limits or expectations, Tom created the new Ritchey WCS Steel Adventure Fork for those of us that are unbound by the constraints of riding-surface type, love the challenge of seemingly insurmountable distances, and free from pre-conceived notions of what a modern fork should be. The new WCS Steel Adventure Fork has been meticulously engineered and painstakingly built to perform as only a steel fork can - compliant yet confident; strong yet supple; forgiving yet razor sharp. Featuring a 1-1/8” straight steerer for just the right amount of welcome compliance, this fork delivers premium comfort, offers practical features, and gives riders a truly memorable experience on all manner of cycling adventures. With your desire to ride far and long in any condition or under any circumstance, the Steel Adventure Fork features rack mounts for packs full of gear and a fender mount to keep the grime off you and your bike. The three multi-purpose mounts on the legs give you more places to stow the necessities you gather at the last cafe. The WCS Steel Adventure Fork also fits up to 27.5 x 2.6” or 29” x 2.6” tires (depending on tire make and model) – making this fork the ultimate addition to any rig assembled for the purpose of seeking, discovering, and enjoying adventure. - Multi-purpose mounts on fork legs - Rack and fender mounts - Compatibility for 180mm disc brake rotors - Featuring a 1-1/8" straight steerer - Fork fits up to 27.5 x 2.6" or 29" x 2.6" tires - Weight: 1155g uncut

When mountain bike suspension first hit the ground, things were simpler. The best bike was the one you were riding; uphill, downhill, quick laps or all-day epics. The Bomber Z2 revives this purist mindset with a smooth and plush mountain bike fork that’s ready to ride out of the box. Trail riders rejoice — your low maintenance, high durability solution is here, and it’s worthy of the name Bomber. Long live fun. Features - Stiff 34mm chassis for precise steering and traction - Low maintenance Rail Damper for intuitive compression adjustment ?- Simple rebound adjustment for the set-and-forget rider - Travel options from 140-150mm (27.5), 100-140mm (29) - 44mm rake with option of 51mm in 29 LESS IS MORE The intuitive, built-from-the-ground-up Rail damper is easy to use with all the on-trail performance you need. A simple sweep adjuster can lock out for the climbs, open up for the descents and easily adjust to every type of terrain in between. PERFORMANCE WHERE IT MATTERS When we designed the Bomber Z2, we took out the things that don’t matter and kept the things that do. That means fewer clicky dials, but all the on-trail performance of a stiff chassis and butter-smooth damper, from top to bottom. THE GO ANYWHERE, DO (PRETTY MUCH) EVERYTHING MTB FORK The Bomber Z2 is built to get out the door and ride. No extensive setup procedure or inconvenient service schedules. Trail riding never felt this uncomplicated. Focus on what’s important — having fun on your bike.

• Chromoly construction • V-brake mounts • I.S. disc mount • Fits bikes with 20-inch wheels • Steerer length: 250mm

The beautiful Big Block track fork is available in both 1-inch and 1-1/8-inch sizes. Lugged crown, matching tips, straight blades, and looks that will make your heart melt. It’s the perfect replacement fork for nearly any track bike. - Material: Full 4130 High Quality Chromoly tapered fork blades, lugged crown, and matching dropouts - Axle to Crown Length: 375mm - Offset: 32mm - Steerer Tube Length: 300mm - Spacing: 100mm - Tire Clearance: 32c - Brake Mount (Fork): mid reach caliper (47mm - 57mm)

The ZEB Select is packed with performance in a stout 38mm chassis and features the updated DebonAir air spring with the trusted Charger RC damper. SKF wiper seals and Maxima Plush fluid reduce friction, silence noise, and provide all-around lasting performance anywhere you need it to be. - New, 38mm chassis for increased stiffness and rider confidence - Updated, highly tunable DebonAir spring offers a buttery-smooth feel off the top and maintains a higher ride height for increased confidence in steep terrain - Charger RC damper features low-speed compression adjustment - Dual Position Air adjustment option to change the geometry of the bike for climbs and descents - Ultra-low-friction SKF wiper seals provide long-lasting fork performance and improve overall suspension feel - Maxima Plush damping fluid reduces friction and silences damper noise

With optimized material concentrated at the brace and seal area, outstanding stiffness and steering precision, Recon Silver is an all-around performer suited for any MTB. Features - New graphics are easy to read and make a fresh impact - Motion Control damping featuring low-speed compression adjustment to lockout - Fast Black finished 32mm steel upper tubes couple stiffness with a premium look - Includes Right OneLoc Remote

From the pavement to the gravel, Origin-8's Cromo-Lite Disc Road Fork is made to explore. Crafted from super tough 4130 cromoly, it provides a comfortable ride with room for 28c tires for added control. And, it features mounts for disc or caliper brakes so you can ride your way.

• Cantilever brake mounts • 45mm rake • Chromoly construction • 1 1/8-inch steerer diameter • Threadless fork

Own the mountain with the award-winning 36 Factory, featuring high- and low-speed rebound adjuster, improved compression damping and reduced friction for unmatched performance and adjustability. - Genuine Kashima Coating on upper tubes - FIT damper and FLOAT EVOL air spring - Low friction seals for improved performance - Lower Leg Bleeders and Bypass Channels - Floating axles for perfect alignment - Updated Crown Design saves up to 20 grams, and offers significant structural improvements

36 E-Optimized Factory forks are made specifically for the rigors of E-Bikes with a stouter chassis and longer durability due to adding material to strengthen critical areas. The design also uses tuning originally done for Enduro use, which fits the needs of the E-MTB and overall E-Bike uses. - Genuine Kashima Coating on upper tubes - FIT GRIP2 Damper and FLOAT air spring - E-Bike Chassis - Lower Leg Bleeders and Bypass Channels - Floating axles for perfect alignment - Updated Crown Design saves up to 20 grams, and offers significant structural improvements

Own the mountain with the award-winning 36 Factory, featuring high- and low-speed rebound adjuster, improved compression damping and reduced friction for unmatched performance and adjustability. - Genuine Kashima Coating on upper tubes - FIT damper and FLOAT EVOL air spring - Low friction seals for improved performance - Lower Leg Bleeders and Bypass Channels - Floating axles for perfect alignment - Updated Crown Design saves up to 20 grams, and offers significant structural improvements

All Box One forks are engineered and crafted using our Oversized Technology. These forks are the most important component in the quest for bike control. We’ve moved carbon from areas of low stress to areas that handle high loads. Those muscular shoulders aren’t just for looks as they are integral to achieving superior steering stiffness. When combined with Box’s other Oversized components, you’ll experience heightened responsiveness and reduced latency. Key differences: This particular model fork is tailored for larger-sized racers. It also takes our application of Oversized Technology one step further as it includes a tougher 1-1/8 inch chromoly steerer tube and stiffer 20mm through-axle cold-forged dropouts. Weight Limit: 115kg (253 lbs) with limitations per Category 2 of EN 16054:2012 Standard. FEATURES - Oversized Technology™ - Chromoly Steel Steerer Tube to Accommodate Larger-Sized Racers - 20mm Through Axle to Increase Responsiveness - Internal Butterfly for Added Durability at Steerer Tube and Fork Crown Interface

The Reba is no prima donna. Even though it's available with a host of race-worthy technologies, this cross country fork doesn't need the promise of a podium to give its all. It expects to be ridden every day, which is just what you'll want to do once you experience its supreme versatility. From quad-burning climbs to grin-inducing descents, the Reba is the ultimate trail warrior for daily duty. - 9mm QR - 40mm offset

With a FLOAT EVOL air spring and on-the-fly compression adjustability, 32 Taper-Cast Factory delivers just enough tunable travel to take the edge off of wherever your gravel adventures may lead you. - 700c chassis with clearance for large volume tires (50 mm max) - Kashima Coated 7000 series aluminum stanchions and 12x100mm bolt-on thru axle - FLOAT EVOL Air Spring and FIT 4 damper, featuring three on-the-fly settings - Open, Medium, and Firm - Lightweight air spring optimized for short-travel - Lightweight 32mm Step-Cast chassis with Lower Leg Air/Oil Bypass Channels - Integrated full fender mounts (700c x 45 mm max with fender)