Chainrings

absoluteBLACK Oval Direct Mount 1x Chainrings for SRAM greatly improve traction and climbing abilities. They are designed for SRAM cranks that have a 3-bolt direct mount interface and removable spider. Direct mount chainrings provide significant weight savings over a standard spider and chainring combination. They are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. Ovality has been optimized for each chainring size, ranging from 10.2-14.4%, with timing of 110.5-116.3° after TDC (top dead center). - Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding - The unique, patent-pending narrow-wide tooth profile keeps the chain in place - Teeth have been 3D-machined for ultimate mud shedding and quieter operation - Provides excellent weight-to-strength ratio - 6mm offset is designed for 135/142 spacing on standard DUB/GXP/Long-Spindle BB30, as well as 170/177 spacing on fat bike cranks

SRAM's Red road chainrings are stamped from 7075 aluminum for low weight and excellent strength. The teeth are ramped and pinned for precision shifting, too.

Replacement PowerGlide ring for 11 speed crankset. - Compatible with Asymmetrical Yaw front derailleurs - Bolt Circle Diameter (BCD): 110 BCD - Material: Aluminum

SRAM's road chainrings are stamped from 7075 aluminum for low weight and excellent strength. The teeth are ramped for precision shifting, too.

Shimano Ultegra 6800 11-Speed Inner Chainrings - Material: Aluminum - Ring Position/Type: Inner

Intense study of chain and chainring wear patterns led to the radical tooth profile that lasts longer, runs quieter and further improves chain retention. - Can be used with Eagle 12 speed or SRAM 11 speed chains - Direct mount rings with 3mm offset fit Boost geometry Eagle cranks; direct mount rings with 6mm offset fit traditional geometry Eagle cranks and GXP spindle XX1, X01, X0, X1 and X9 cranks

FSA Pro Road Chainrings deliver flawless shifting for any road drivetrain. - Precision CNC machined AL7075/T6 alloy

TruVativ Trushift V7 Chainring - Trushift middle and outer rings (32T, 36T, and 44T) feature shift ramps and pins - Ring Position/Type: Middle - Drivetrain Speeds: 8, 9, 10, 11 - Material: Aluminum

This direct mount chainring coincides perfectly with the Comet Modular Crank. The megatooth design allows you to put all of your power through without worrying about dropping your chain. - Long tooth profile enhances chain retention - Thick-Thin tooth design for maximum chain engagement - Laser-etched logos

Original equipment on SRAM and Truvativ cranks, these chainrings also work well with other drivetrains. - Medium Overshift Pin - 104mm BCD - Use with 22T

- Asymmetric four arm shape for greater stiffness in the power zones of the pedal stroke - Compatible with 9/10/11 speed chains, mounts using a common Park BBT-22 tool

The new FLT 12 SPD chainring has an updated tooth profile optimized for SRAM Flattop 12 SPD chains. Easton direct mount rings use a new narrow/wide design specifically tailored to road/cx/gravel applications. The individual tooth profile has moved from the traditional symmetrical shape to more directional specific design with the intention to create a positive chain roller engagement to help with chain retention, critical to prevent chain slip and bounce over rough terrain. Compatible, but not optimized for, 11-speed chains. Ring only. Crankarms and spindles sold separately. - EA90 SL Alloy - Optimized for 12-Speed Flattop Chains - Cinch System Compatible - Variable Tooth Width - Optimized Retention via Directional Tooth Design - Weight Complete: 442g 172.5mm 40t w/o BB - Chainline: 47mm

Original equipment on SRAM and Truvativ cranks, they also work well with other drive trains. - Supplied in TruVativ packaging - No retention pin, use with guard

Gates Carbon Drive CDX Front Sprockets for Bosch GEN2 are crafted from stainless steel and are the best choice for high-mileage touring or rugged off-roading. - Bosch GEN2 fitment - Stainless steel construction - 11mm pitch - Includes shim kit

- 12 speed Record / Super Record chainring - Surface treatment improves durability - 145 BCD outer rings are specific to Record or Super Record, while 112 BCD inner rings are shared between the two groups

Origin-8's BMX/SS/Fixie Chainrings are CNC-machined in the USA out of tough, light and durable 6061-T6 aluminum and are compatible with BMX, fixie and track drivetrain components. They have an attractive and corrosion-resistant anodized finish.

Origin-8's Alloy Non-Ramped Chainrings are CNC-machined in the USA out of tough, light and durable 6061-T6 aluminum and are compatible with 8-, 9- and 10-speed drivetrain components. They feature an attractive and corrosion-resistant black anodized finish.

Origin-8's Alloy Ramped Chainrings are CNC-machined in the USA out of tough, light and durable 6061-T6 aluminum and are compatible with 8-, 9- and 10-speed drivetrain components. They have ramped teeth and are pinned for superior shifting and durability, and feature an attractive and corrosion-resistant black anodized finish.

FSA ATB chainrings deliver flawless shifting for any mountain drivetrain. Available in alloy and steel options.

FSA's MTB Pro chainrings deliver flawless shifting for mountain drivetrains. - Precision CNC machined AL7075/T6 alloy - Shifting ramps and stainless pins for improved performance - D-10 chainrings are double 10 speed Sram/Shimano compatible, but are only guaranteed perfect fitment on FSA MTB cranksets

Original equipment on SRAM and Truvativ cranks, these chainrings also work well with other drivetrains.

Eagle Technology creates the smoothest, quietest, longest-lasting, and most efficient drivetrains we've ever made. The radical new look and feel of our X-SYNC 2 Eagle chainring is a direct result of SRAM drivetrain engineers studying the performance and wear characteristics of thousands of X-SYNC chainrings. The longer, positive-rake tooth shape has been designed to work perfectly with the new Eagle chain to increase chain retention and overall pedaling efficiency, while decreasing friction, noise, and wear. - X-SYNC 2 chainring design increases chain retention, wear life, and reduces friction and noise. - Designed to be used with Eagle chain - Non-Boost 6mm offset

Origin-8's BMX/SS/Fixie Chainrings are CNC-machined in the USA out of tough, light and durable 6061-T6 aluminum and are compatible with BMX, fixie and track drivetrain components. They have an attractive and corrosion-resistant anodized finish.

Origin-8's Alloy Ramped Chainrings are CNC-machined in the USA out of tough, light and durable 6061-T6 aluminum and are compatible with 8-, 9- and 10-speed drivetrain components. They have ramped teeth and are pinned for superior shifting and durability, and feature an attractive and corrosion-resistant black anodized finish.

Origin-8's Alloy Ramped Chainrings are CNC-machined in the USA out of tough, light and durable 6061-T6 aluminum and are compatible with 8-, 9- and 10-speed drivetrain components. They have ramped teeth and are pinned for superior shifting and durability, and feature an attractive and corrosion-resistant black anodized finish.

Origin-8's Alloy Ramped Chainrings are CNC-machined in the USA out of tough, light and durable 6061-T6 aluminum and are compatible with 8-, 9- and 10-speed drivetrain components. They have ramped teeth and are pinned for superior shifting and durability, and feature an attractive and corrosion-resistant black anodized finish.

Dimension classic 4-hole cruiser chainwheel, with offset to allow chainline adjustment. - Classic 4-hole cruiser chainwheel - Offset ring allows chainline adjustment - Polished steel - Fits 1-piece crankarms - Requires 1/2-inch x 1/8-inch chains

A total redesign of Odyssey's popular MDS sprocket. With a built-in full guard, this sprocket lives up to its name, helping to protect your chain from anything you can throw at it. Sprocket thickness increases towards the guard area for greater strength. Compatible with all chain widths. - 7075 Aluminum

Origin-8's Alloy Ramped Chainrings are CNC-machined in the USA out of tough, light and durable 6061-T6 aluminum and are compatible with 8-, 9- and 10-speed drivetrain components. They have ramped teeth and are pinned for superior shifting and durability, and feature an attractive and corrosion-resistant black anodized finish.

- 64/104mm BCD 4-bolt chainring sets for MTB, Boost, and Fat applications - Shifting ramps and stainless steel pins for smooth shifting - 10 or 11 speed compatible - Stamped AL2014-T6 alloy construction - BCD: 64/104mm 4-Bolt - Type: 2x - Tooth Type: Standard

The radical look and feel of SRAM's X-SYNC 2 Eagle chainring is a direct result of SRAM drivetrain engineers studying the performance and wear characteristics of thousands of X-SYNC chainrings. They subjected every size of chainring to untold environmental and mechanical tortures, abuse and neglect, in both lab and real-world settings, to come up with a chainring that would augment the Eagle drivetrain’s performance in all conditions. The longer, positive-rake tooth shape has been designed to work perfectly with the Eagle chain to increase chain retention and overall pedaling efficiency, while decreasing friction, noise and wear.

Origin8's Thruster 104mm BCD 4-bolt chainrings are great for MTB, Boost, and Fat applications. Their Narrow/Wide tooth design provides chain retention on 1x systems, and they are 10, 11, or 12 speed compatible. - Forged and hard anodized AL6061-T6 alloy construction - BCD: 104mm 4-Bolt - Type: 1x - Chain Compatibility: 10/11/12s - Tooth Type: Narrow/Wide

- Fits 3-piece 22mm BMX cranks - 2mm 6061 aluminum core - Includes adapter for 19mm spindles - Teeth: 25T - Chain Compatibility: Singlespeed - Tooth Type: Standard

absoluteBLACK Oval Direct Mount 1x Chainrings for SRAM greatly improve traction and climbing abilities. They are designed for SRAM cranks that have a 3-bolt direct mount interface and removable spider. Direct mount chainrings provide significant weight savings over a standard spider and chainring combination. They are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. Ovality has been optimized for each chainring size, ranging from 10.2-14.4%, with timing of 110.5-116.3° after TDC (top dead center). - Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding - The unique, patent-pending narrow-wide tooth profile keeps the chain in place - Teeth have been 3D-machined for ultimate mud shedding and quieter operation - Provides excellent weight-to-strength ratio - 0mm offset is designed for 157 Super Boost spacing on standard DUB/GXP/long-spindle BB30, as well as 135/142 spacing on short-spindle BB30 cranks - Fits Super Boost SRAM XX1, XX1 Eagle, X01, X01 Eagle, X0, X9, X7, S2210, S1400, and Truvativ AKA cranks, as well as fat bikes with GXP spindle

- MTB direct mount chainrings - Narrow/Wide tooth design for chain retention on 1x systems - 10, 11, or 12 speed compatible - Forged and hard anodized AL6061-T6 alloy construction - SRAM 3-bolt interface for crank arm mounting - BCD: Direct Mount - Type: 1x - Spec: GXP - Chain Compatibility: 10/11/12s Tooth - Type: Narrow/Wide - Offset: 6mm

FSA Super Road Chainrings are designed to provide flawless shifting, with minimal weight and unmatched durability. - Precision CNC machined AL7075/T6 alloy

absoluteBLACK Oval 110 BCD 1x Chainrings for gravel greatly improve traction for gravel or road 1x setups. They are designed for all Shimano 4-bolt cranks such as Dura-Ace 9100, 9000, Ultegra 8000, 6800, and more. The specially designed narrow-wide tooth profile keeps the chain snug, allowing you to leave your chain keeper in the garage. They are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. Ovality has been optimized for each chainring size, ranging from 10.5-11.4%, with timing of 112-113° after TDC (top dead center). - Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding - Teeth have been 3D-machined for ultimate mud shedding and quieter operation - The unique, patent-pending narrow-wide tooth profile keeps the chain in place - Provides excellent weight-to-strength ratio - 12-Speed Eagle compatible - Chainring has 1.5mm offset toward frame to provide the perfect chainline - Chainring bolts are included

Dimension Chainrings. - No ramps, pins, or shift aids

- Trushift chainrings feature shift ramps and pins - Drivetrain compatibility: 8, 9, 10, 11 - 104mm BCD

Shimano Ultegra R8000 Series Chainrings are designed for use with Shimano's 11-speed Ultegra crankset.

Alfine S501 chainring for single speed internally-geared drivetrains.

Shimano chainrings offer durability and confidence-inspiring performance, and go a long way towards getting a drivetrain back to optimum working condition. - For use with 38t AM-type outer ring

Shimano SLX M660 10-Speed chainrings get worn out drivetrains back in like-new condition.

Rugged durability comes naturally to the X0 Eagle T-Type direct mount chainring. Finished with a distinct, dual-spoke design your shifting will never be compromised. - 3mm offset - Light weight and incredibly durable aluminum chainring - 8-bolt direct mount design (Mounting bolts included) - Compatible with SRAM T-Type chains

SRAM X-Sync Road Direct Mount Chainrings for Rival drivetrains feature a wide-tooth, narrow-tooth design to provide maximum chain control. - SRAM X-SYNC wide-tooth, narrow-tooth chainring technology provides maximum chain control - Laser-etched chainring finish is more durable - X-Range gearing technology gives you more range and a smoother gear progression, so you're always in the right gear Specifications: - Round or Oval: Round - Direct Mount Type: Direct Mount SRAM - Tooth Count: 38 - Material: Aluminum - Ring Position/Type: Chain Retaining Single Ring - Drivetrain Speeds: 12

SRAM's road chainrings are stamped from 7075 aluminum for low weight and excellent strength. The teeth are ramped for precision shifting, too.

SRAM's road chainrings are stamped from 7075 aluminum for low weight and excellent strength. Shifting pins and ramped teeth deliver precision shifting, too.

SRAM 94 BCD narrow-wide chainrings for X01 and X1 cranks. Our NSB narrow-wide rings are CNC machined in Canada and feature a durable tooth profile that virtually eliminates chain drop. Note: The 28T – 94 BCD ring does not use the OE screws. The NSB 28T ring requires 4x M8 x 0.75 x 10mm long bolts. These are commonly available at your LBS and are the most commonly used bolt and nut combination to mount chainrings to cranks. All other sizes, 30T–36T, use the OE screws. Specifications: - 94mm Bolt Diameter Circle (4-bolt 94 BCD) - Bottom Bracket Types: BB30 & GXP - Chainline: 28T is 48mm / 30T–36T are 49.5mm - Machined from solid 7075 T6 Aluminum - Anodized Black with Laser Etched Graphics - Compatible with all 9, 10, 11, & 12-speed SRAM drivetrains - Compatible with all 9, 10, & 11-speed Shimano drivetrains Precision CNC Machined in Whistler, BC Weight: 28T – 40g 30T – 37g 32T – 42g 34T – 55g 36T – 65g

Cinch Oval rings help you put down the watts in the best part of our pedal stroke, on your 10, 11, or 12-speed drivetrains. Ovals provide enhanced traction control when compared to conventional round rings, particularly in high torque, low cadence riding scenarios. We’ve got your timing clocked to improve on that grueling climb. Or simply make your personal pedal-shuttle a little more bearable. And by simply flipping the ring, it becomes Super Boost compatible without losing the same excellent timing to help you maintain traction during the toughest part of your push - Optimized pedal stroke - 1x drivetrain variable width tooth profile stops dropped chains - Super Boost compatible - Wear-resistant 7075 Aluminium

- Compatible with 1-piece BMX cranks - CNC machined 6061-T6 alloy construction - Teeth: 25T - Material: Alloy - Chain Compatibility: 1/2x 1/8-inch - Tooth Type: Standard

The all new Turbine 11 Speed rings are ready to ride. Completely redesigned from the ground up, these rings shift like nothing else. The Turbine rings are machined from 7075 aluminum, so they are built to last. Rings are CNC'd from 7075 alloy, creating a ring with instantaneous smooth and quiet shifting, even under load. These 2x rings are super stiff at a minimal weight, resulting in a ring that demonstrates sharp and quick shifts while being highly resistant to impacts.

absoluteBLACK Premium Round 110 BCD Road Chainrings utilize absoluteBLACK's top-tier design features. They are designed for new and old Shimano 4-arm cranks, such as Dura-Ace 9100, 9000, Ultegra 8000, 6800 & 105 R7000, and more. Optimized with smooth shifting in mind, premium chainrings have a 6-point ramp and recess design. Chainrings are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. - Chainring BCD: 110 Shimano Asymmetric - Rings provide exceptional stiffness due to thicker, 5mm construction - Provides excellent weight-to-strength ratio - 10, 11, and 12-speed compatible - If only switching the inner chainring, use all original crank bolts

Shimano STEPS E8000 chainrings are specially designed for STEPS drivetrain systems. - For use with E-Bike rear derailleur system compatible chain - Chainring for 53mm chain line

Dimension Multi Speed Chainrings. - CNC-machined AL-7075 - Has ramps and pins to aid in shifting (not on 74mm BCD inner chainring) - Same BCD as Surly Long Haul Trucker, Cross-Check, and Troll complete bikes (74mm & 110mm)

Live Long and Prosper Steel is real, so if you are pining for a 12 speed, direct mount chainring for your Cinch crankset that will stand up to years of kicking up dirt, cruising endless singletrack, smashing climbs, and everything in between, then look no further! Freedom Fighter Our Cinch interface makes this long-wearing steel direct mount chainring fast and easy to swap so you can customize your Shimano 12-speed drivetrain. Long-Hauler Stamped from real steel, this ring will keep going and going...and going. Plus, your 12-speed chain stays secure thanks to our awesome NW tooth profiling. - Compatible with Cinch Direct Mount Cranks - Steel - Direct Mount

absoluteBLACK 1x Oval Direct Mount Chainrings for SRAM greatly improve traction and climbing abilities. They are designed for SRAM cranks that have a 3-bolt direct mount interface and removable spider and will only work with 12-speed Hyperglide+ chains. Direct mount chainrings provide significant weight savings over a standard spider and chainring combination. They are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. Ovality has been optimized for each chainring size, ranging from 10.2-14.4%, with timing of 110.5-116.3° after TDC (top dead center). - This chainring will only work with Shimano Hyperglide+ CN-M9100, 8100, and 7100 chains due to the different thickness of the teeth - Teeth have been 3D-machined for ultimate mud shedding and quieter operation - 3mm offset converts any SRAM crank into Boost setup needed on Boost-spaced bikes - Designed for GXP, DUB, and long-spindle BB30 cranks - Provides excellent weight-to-strength ratio - 3mm offset is designed for 141/148 Boost spacing on standard DUB/GXP/long-spindle BB30, as well as 157 Super Boost spacing on dedicated Super Boost DUB cranks

absoluteBLACK Round Direct Mount 1x Chainrings for CINCH allow for flawless boost drivetrain setup. They are designed for Race Face cranks that utilize the CINCH system. Direct mount chainrings provide significant weight savings over a standard spider and chainring combination. They are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. - The unique, patent-pending narrow-wide tooth profile keeps the chain in place - Teeth have been 3D-machined for ultimate mud shedding and quieter operation - Provides excellent weight-to-strength ratio - 3mm offset is designed for bikes with Boost spacing and fat bikes (when reversed)

absoluteBLACK Oval 110 BCD 1x Chainrings for Cyclocross greatly improve traction for CX or gravel riding. They are designed for all Shimano 4-bolt cranks such as Dura-Ace 9100, 9000, Ultegra 8000, 6800, and more. The specially designed narrow-wide tooth profile keeps the chain snug, allowing you to leave your chain keeper in the garage. They are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. Ovality has been optimized for each chainring size, ranging from 10.5-11.4%, with timing of 112-113° after TDC (top dead center). - Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding - Teeth have been 3D-machined for ultimate mud shedding and quieter operation - The unique, patent-pending narrow-wide tooth profile keeps the chain in place - Provides excellent weight-to-strength ratio - 12-Speed Eagle compatible - Chainring bolts are included

Narrow wide chainrings compatible with Race Face CINCH system cranks. Direct mounting allows an easy switch between rings and spiders. - Compatible with 9, 10, 11, and 12 speed - Narrow Wide tooth profiling ensures consistent chain retention - Lockring installed/removed with ISIS BB tool - Stiff 4mm plate thickness to transfer loads without flexing

The EX1 drive train was designed specifically for the demands of electric-assist mountain bikes: a wide gear range with bigger jumps between gears and sturdy components to handle higher torque loads. Liberal use of features found on SRAM’s high end MTB parts provide high value, quiet operation and ease of service. - X-Sync (wide-narrow) tooth profiles for great chain management - Compatible with Bosch mid-drive E-bike systems - Material: Steel - Size/BCD: Direct mount - Recommended Group: EX1