Cables

Jagwire's Aluminum Housing Connectors allow joining two sections of the same-size cable housings together in case you only have shorter sections and you need to make a longer one. It comes in 4 and 4.5mm diameters. Match the diameter of the housing sections on your bike. - Comes in a pack of 10

- Nano-polished ultra slick extruded cable is non-coated for ultimate smoothness and durability - Compatible with Shimano/SRAM road and MTB shifters - Pre-stretched for more responsive braking - 1.1mm x 2300mm

Ditch the zip ties and clean up the look of your cables with Origin-8's Clamp-on Cable Stop. Available in a variety of diameters for different sized round frame tubes, the cable stop bolts on and provides a channel to run rear brake or derailleur housing to hold it securely in place. It's made of lightweight CNC'd aluminum.

Frame-mounted barrel adjusters allow cable tension to be easily fine tuned. - Adjuster threading is M5 standard: 5mm OD, 0.8mm thread pitch - Bag of 10

Jagwire Mini Combo Boxes contain needles and compression bushings for many common hydraulic disc brakes. - Includes a variety of common fittings for a range of disc brakes from SRAM, Avid, and Shimano

- Routes cables underneath the bottom bracket - Will not rust or corrode

- Use: S.I.S. - Length: 30mm

- 50 feet (15.2 meters) length - 5mm diameter cable housing - For brake cables

- For mountain bike cable-actuated brakes - 1.5mm x 3000mm - Stainless steel

- 50 feet (15.2 meters) length - 5mm diameter brake cable housing

- Replacement link wire for cantilever brakes

- Galvanized steel inner wire - Standard 5mm brake housing - Front or Rear

- Complete cable kits for internal three-speed hubs

Slick stainless cables undergo a polishing process to further remove imperfections. This creates a smoother surface with lower friction than PTFE-coated cables. With no coating, these are highly durable and compatible with all performance housings and lubricants. Typically used on high-end bikes, by riders wanting improved performance. Pro Polished cables eliminate the need for flaky coatings with an innovative polishing process to reduce friction and improve performance. - Polished stainless steel construction for low friction - Compatible with all performance housing and lubricants - Cables are tinted gold for easy identification

Replacement parts for Jagwire's Elite Link kits keep things functioning as intended. - Extra links for long housing runs or replacing damaged sections - 20 links at 10mm of length each

Original equipment hydraulic hoses for no-compromise brake performance. - Hose Use: Front, Rear - Black - 2000mm hose length - Compatible with SRAM road hydraulic disc brakes

Shimano, SP41, 4mm Shifter housing, 50m

Jagwire's Mickey Adjusting Barrels are quality adjusters that mount to most road frames. They make it easy to fine-tune your shift cable tension by hand for optimum shifting performance.

Shimano XTR OT-SP41 Polymer Coated Derailleur Cable Sets

Jagwire's Frame-Mount Adjusting Barrels thread into the housing stops on most road frames and allow easy adjustment of cable tension for fine-tuning your shifting. They are made of aluminum for light weight and durability and have fluted, rubber-coated rings for easy turning by hand.

- Sold in pairs - Allen wrench included

Jagwire's M7 Adjusting Barrel is a 7 x 1.0mm-threaded replacement cable-adjusting barrel. It's the right part for many older-style mountain bike brake levers. It comes in two models and is made of durable metal with a lockring for locking your adjustments. You get a pack of 10.

Designed to work seamlessly with Jagwire's Mountain Pro Hydraulic lines (sold separately), Jagwire's Mountain Pro Quick-Fit Adapters are the perfect way to enhance braking performance and simplify disc brake setup. Each adapter kit contains all the components required to connect both front and rear lines to the levers calipers. - Allow the easy installation of Jagwire hose with Shimano disc brakes - Kits contain enough hardware for both front and rear brakes - Requires Jagwire Mountain Pro Universal Disc Brake Hose Kit for installation Compatibility - HFA312: Shimano XTR M975, Deore XT M775, SLX M665, LX T665 and M585, Hone M601, Deore T615, M595, M535 and M525, Alfine S500 and S501, Metrea U5000, Alivio M4050, Acera M3050, and Non-Series T605, MT500, M575, M486, M485, M446, M445, M395, M365, and M355 - HFA314: Shimano Dura Ace R9120, R9170, R9180 and Ultegra R8020, R8070

Jagwire's Universal Sport Shift Kits are the perfect way to enhancing shifting performance and precision and add style to your bike, too. Compatible with Shimano, SRAM, and Campagnolo systems, the slick stainless cables provide smooth, precise shifts, excellent durability and corrosion resistance. And with the housing and all the needed parts included, these kits are easy to install and ready to deliver years of flawless gear changing.

Spiral cable wrap manages those messy cables to achieve a sleek clean look while protecting shifting, braking, and electronic bike cables and hoses.

- Left and right shifter compatible - Road and MTB compatible - 1.1mm polished stainless steel cable

Shimano, SLR brake housing, 40m, Black

Hydraulic hose with banjo fitting for TRP brakes.

Aluminum, Lightweight, Lubricated An alternative to traditional compressionless housing, this system is made of nesting alloy pieces that protect the liner. Although this housing is typically more expensive, it has several advantages including increased flexibility, reduced weight and increased durability. Both shift and brake housings use identical Slick-Lube liners and interconnecting alloy pieces. - Slick-Lube liners reduce friction and protect against corrosion - Includes four 1600mm liners

- Great for center-pull cantilever brake setups - Fits threadless fork steerer tubes - Includes barrel adjuster - 24mm cable stop drop - AL6061-T6 alloy construction

Slick stainless cables undergo a polishing process to further remove imperfections. This creates a smoother surface with lower friction than PTFE-coated cables. With no coating, these are highly durable and compatible with all performance housings and lubricants. Typically used on high-end bikes, by riders wanting improved performance. Pro Polished cables eliminate the need for flaky coatings with an innovative polishing process to reduce friction and improve performance. - Polished stainless steel construction for low friction - Compatible with all performance housing and lubricants - Cables are tinted gold for easy identification

• Break-Away Quick Disconnect • Time saving system for managing brake cables on Break-Away bikes • Light threaded alloy barrels with rubber noise dampener • Available for both derailleur and brake cables • Brake Quick Disconnect sold individually • Derailleur Quick Disconnect sold in pairs

- Precision-machined brass shift cable ferrules for improved braking and shifting performance - A flat bottom on the inside prevents housing from pulling through ferrules. - 4mm ID for use with most shifting cables - 50-count bottle

- Upper cables measured from brake lever to detangler top plate - Lower cables are measured from detangler to cable stop/London mod - Includes adjusters compatible with most detangler styles - Use: Lower - Length: Dual Cable - Diameter: 1.5mm

Jagwire anti-kink end caps are made with a flexible tip to eliminate kinks or cracks in the housing where there are tight bends or repeated motion. These are perfect for use with folding bikes, suspension lockouts, dropper seatposts and handcycles. Use anti-kink end caps on any area of the bike where shift or brake housing has extreme or tight bends. - Eliminates kinks and loose connections at tight bends - Perfect for folding bikes and height-adjust seatposts

SRAM's Inline Barrel Adjusters are placed on your brake cables near the handlebars so that you can turn the adjusters to fine-tune your braking. They feature durable and light aluminum/composite construction with rubber covers for easy operation.

Jagwire's M6 Adjusting Bolt is a metal adjusting barrel that is the correct replacement adjusting barrel for the cable clips/hangers found on many cable brake systems old and new. It makes it easy to tighten/loosen your brakes without tools. Its 6 x 1.0mm threading fits most clips/hangers and it has a lockring for locking your brake adjustment once it's set. You get a pack of 25.

Sunlite's Cable End Button replaces the worn out piece that goes between your brake cable and the brake lever body. Replacing it along with cables and housing helps add new life to your brakes and shines u the bike, too!

Includes - 1.5mm coated cables (1 x 850mm, 1 x 1750mm) - 5mm Kevlar-reinforced compression-free housing - Ferrules, end caps, frame protectors

Slick compressionless brake cable/housing kits offer smooth, crisp, and reliable braking Kits include: - 5mm pre-lubed, Kevlar-lined, compressionless brake housing - 1.5mm stainless steel die-pulled and polished slick brake cables with SRAM/Shimano compatible heads for both MTB and Road applications - Alloy sleeve ferrules - Alloy O-ring ferrules - Cable donuts - Spiral frame protectors - Cable tips

SuperSlick compressionless brake cable/housing kits offer unrivaled braking performance Kits include: - 5mm pre-lubed, Kevlar-lined, compressionless brake housing - 1.5mm stainless steel die-pulled and polished super-slick brake cables with electrolysis coating and SRAM/Shimano compatible heads for both MTB and Road applications - Alloy sleeve ferrules - Alloy O-ring ferrules - Cable donuts - Spiral frame protectors - Cable tips

- Stainless steel die-pulled and polished super-slick brake cable with electrolysis coating - Electrolysis coating offers an ultra-smooth surface finish that greatly reduces friction for outstanding braking performance - SRAM/Shimano compatible head - Extra-long 2800mm cable length - Use: Front or Rear - Length: 2800mm - Diameter: 1.5mm - Style: MTB

Slick compressionless brake cable/housing kits offer smooth, crisp, and reliable braking Kits include: - 5mm pre-lubed, Kevlar-lined, compressionless brake housing - 1.5mm stainless steel die-pulled and polished slick brake cables with SRAM/Shimano compatible heads for both MTB and Road applications - Alloy sleeve ferrules - Alloy O-ring ferrules - Cable donuts - Spiral frame protectors - Cable tips

Replacement grub seals for Jagwire Elite Sealed kits. - Material: Rubber - 10 Pieces

Basics shift cable and housing set provide replacement level quality in an easy-to-use double ended package. - Non-extruded galvanized inner cable - Lead-free PVC housing - Double ended for SRAM/Shimano and Huret/Simplex - Disc style Huret/Simplex end is slightly smaller than original spec, but is functionally compatible with Suntour X-Press shifters - Color: Black - Diameter: 1.2mm - End Type: Shimano/SRAM - Housing Diameter: 5mm

Inline adjusters make on-the-fly derailleur cable tension adjustments safe and easy. - 5mm - Stronger detent mechanism for use with brake housing - Perfect for mechanical disc brakes

In-line cable tension adjusters - Indexed fine-tuning allows you to feel each "click" of adjustment and prevents loosening from vibration - Fits cable housing without ferrules

Jagwire's Sport Inline Adjusters are installed on your shift cable housing sections so that you can fine-tune the shift cable tension by hand (without tools). They're great for keeping your shifting dialed in. They're precision made of lightweight aluminum and nylon for easy use and durability. To install them, remove the cables and housing sections, cut the top housing sections in two and rejoin the sections with the Inline Adjusters in the middle.

Jagwire's Stick-On Cable Guides are made of lightweight aluminum with adhesive on the bottom. The aluminum lets them conform to any shaped frame tube and the adhesive holds fast. They come with Jagwire's C-Clips, nylon cable clips that snap onto the guides to hold the cables neatly in place. You get a pack of 4.

Jagwire's EZ Handle Single End Straddle Wire is a replacement straddle wire (also called a crossover or transverse cable) for cantilever brakes.

SRAM's Inline Barrel Adjusters are placed on your shift cables near the handlebars so that you can turn the adjusters to fine-tune your shifting. They feature durable and light aluminum/composite construction with rubber covers for easy operation.

Jagwire's 5mm Anchor Bolt fits certain models and types of brakes and is used to secure the cable in place after adjusting it. It is made of plated metal for strength and durability. You get a pack of 25.

Increase your brake performance with Origin-8's Super Noodle. The Super Noodle allows you to run housing all the way to the brake, making the brake respond much smoother and stronger than with a steel or alloy noodle. This sealed noodle also prevents moisture and grime from corroding the cable. - Lightweight resin/alloy design

SRAM's Guide Hydraulic Line Kit is a replacement hose kit for all Guide brakes. - Compatible with SRAM Guide R, RS, RSC, and DB5 brakes - Length: 2000mm

- Nano-polished ultra slick extruded cables are non-coated for ultimate smoothness and durability - Compressionless linear strand housing with slick lube liner for reduced friction - Lightweight sealed alloy end caps and alloy cable tips - Compatible with Shimano/SRAM road and MTB shifters Contents: - 1x - 1.1mm x 1500mm cable - 1x - 1.1mm x 2300mm cable - 2.7m - Compression-less 4mm housing - 8x - Black sealed alloy end caps - 2x - Black dirt guard alloy end caps w/ rubber boots - 2x - Black alloy cable tips - 2x - Black rubber cable donuts - 2x - Black rotating hooks

- Upper cables measured from brake lever to detangler top plate - Lower cables are measured from detangler to cable stop/London mod - Includes adjusters compatible with most detangler styles - Use: Lower - Length: Fits most - Diameter: 1.5mm

Jagwire's Cable Grips are adapters that make it possible to run hydraulic brake lines on bicycle frames that have housing stops that were designed for regular wire cables and standard housing sections. Once the regular cables and housing sections are removed, the Cable Grips are inserted and tightened in place in the standard frame stops. Then, the hydraulic lines are attached and securely held in place by the gripping jaw(s) of the Cable Grips. - Aluminum model accepts lines up to 5mm in diameter and the lines snap in. - Stainless model grips fully around the lines and is adjustable to fit most diameters.

SuperSlick compressionless brake cable/housing kits offer unrivaled braking performance Kits include: - 5mm pre-lubed, Kevlar-lined, compressionless brake housing - 1.5mm stainless steel die-pulled and polished superslick brake cables with electrolysis coating and SRAM/Shimano compatible heads for both MTB and Road applications - Alloy sleeve ferrules - Alloy O-ring ferrules - Cable donuts - Spiral frame protectors - Cable tips

SRAM's Line/Housing Frame Protectors are rubber covers that simply press onto your cable housings and or hydraulic lines to prevent the housings from hitting the frame and rattling or damaging the finish. There are 4 protectors in each package.

The Problem Solvers Downtube Shift Cable Adjusters replace your existing shift adjusters, or let you add integrated shifters to your current down tube shifter-equipped road bike. Made from durable plastic and stainless steel, these adjusters are built to last for countless miles on your road steed. - Sold as a pair - Comes with mounting hardware