Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Parts & Accessories

The MTN Tube Spool is a simple, compact system that'll carry everything you need to fix a flat without weighing you down. To do so, its design allows for a spare tube, with up to a 48mm valve stem, to be rolled-up without damaging the tube. Meanwhile, the Spool can easily hold a lever, CO2 cartridge, and a valve head. - Patent-pending design allows the spare tube to be rolled up while protecting valve stem from rubbing a hole through the rubber. - CO2 valve head and two-sided tire lever snap into place for compact and secure storage. - Holds a single threaded 25g CO2 cartridge. - Fits up to 48mm long tube valve stems. - Hook and loop strap can slide side to side to accomodate all different size mountain tubes
90 Degree twist style mini CO2 head used on SWAT products - Twist design allow CO2 cartridge to be threaded into head and then unthreaded to start CO2 flow. - Flow can be controlled or stopped by threading cartridge back into head. - Includes plastic spacer that allows head to be mounted for storage on cartridge without piercing it.
$0.95 $1.00 5% Off
Replacement UHP head O-ring seal
$2.19
- Genuine Sunlite replacement hose - Type: Fits Sunlite Frame Pump : 5.25mm
$3.00
- Ball-inflating needle for footballs, basketballs and more
$3.25
- Head rebuild kit for current Super Prestige floor pump. Includes cap and gasket.
$3.49
Bringing Lezyne's Smart Kit along means not letting a flat ruin your ride. It contains six glueless patches, a tire boot and a stainless-steel tube scuffer. All of this is stored in a compact pouch that fits just about anywhere for the ultimate in portability.
$3.99
The “Holster” allows you to carry your GUP in style and have quick access to it when it’s needed the most. The long Velcro strap allows it to fit on most frames, seat posts and saddle rails, while the lightweight silicon block protects your frame and keeps your GUP securely fastened. Holster up!
$3.99
A flat won't ruin your ride when you have Lezyne's Classic Kit. It contains 8 vulcanizing patches, glue, an emergency tire boot and a stainless-steel tube scuffer.
$3.99
Have an old pump lying around that doesn't work with the standard Presta valves? This is your solution! Built to convert your old schrader pump into a Presta pump!
$3.99
Replaces worn end on any pump hose. - Head Type: Schrader
$4.39
• Secures frame pump to frame • Nylon • Also good for use as a watch band
$4.95
There’s no easier or more effective way to patch a cut tire on the road or trail than carrying and using Park Emergency Tire Boots (3 per package). These thin, extra-tough patches peel and stick to the insides of tires to repair cuts and contain the tube until you can replace the tire.
$4.95
Park's Vulcanizing Patch Kit includes 4 round patches for small holes and 2 oval patches for wider cuts; a tube of self-vulcanizing glue that bonds the patches to your tube super securely; and sandpaper for preparing the punctured area for gluing. The kit comes in a small plastic box to fit in your seat bag or pack.
$4.95
Prestacycle's newest version of the Presta Head Gasket uses Urethane Elastomer. It’s softer and stronger. It lasts more than 5 times longer, gives a better seal and flexes to work anywhere along the Presta shaft for better tubeless tire application.
$4.95
Mounting Kit for Mountain Morph and Turbo Morph G.
$4.95
Replacement parts for JoeBlow Pro and JoeBlow Booster.
$4.95
Mounting kit for Mini Morph and Road Morph G.
$4.95
Topeak Pump replacement parts and accessories. Includes all parts needed to rebuild TwinHead pumps.
$4.99 $5.00 On Sale
Will fit Specialized Sport/Comp/HP floor pumps from 2010 - present.
$5.00
Rebuild kit for the MTB floor pump. - Compatible with Air Tool MTB floor pump. - Includes O-ring, lube, and grommet.
$5.00
Rebuild kit for our most common Air Tool floor pumps. - Compatible with Air Tool Pro, Comp, and Sport floor pumps. - Includes O-ring lube and grommet.
$5.49
The Super Patch Kit is comprised of a small plastic case, a piece of sandpaper for roughing up the tube and 6 peel-and-stick patches so no gluing is required. The patches stick fast thanks to 3M technology and they're thin and flexy to stretch with the tube. There's no easier way to patch a tube.
$5.90
Park Tool's Pump Rebuild Kit contains one #1081 head as well as one #1087 plunger gasket for their PFP-3, PFP-6 and PFP-8 floor pumps.
$5.95
Made of heavy-duty hook-and-loop material, the Pump and U-Lock Tie also has a neoprene pad stitched next to the rectangular plastic common loop. Put the neoprene pad between your pump and frame, double-back the hook strip onto the loop, and you can rest assured that no matter how hard you ride, your pump will stay put. In addition to attaching pumps, the Pump Tie is also excellent for securing U-locks, fishing poles, and other delicate items that require a secure bond and a load-damping pad. - Dimensions: 1.5 x 10 inches - Weight: .5 ounces/14 grams
$5.95
Prestadapter is a lightweight Presta-to-Schrader adapter with one more great feature. The hole on the opposite side is a Presta valve core remover! Super-light Anodized Aluminum. - Schrader to Presta valve adapter - Presta valve core tool - Forged alloy single piece precision machined body - Only 1.3 grams actual weight each - Two (2) adapters included
$5.99
- Genuine Sunlite replacement hose - Type: Fits Sunlite #4301 : 16 5.8mm"
$5.99
- Genuine Sunlite replacement hose - Type: Fits Sunlite #4301 : 16 5.8mm
$6.59
Replacement Composite Matrix pump mount for all High-Pressure hand pumps (HP, Tech HP, Micro Floor HP/HPG, Pressure, Carbon Pressure Drives). Includes Velcro pump strap.
Page 1 of 4 Next page